Polymer Colorants Masterbatch Color PP TPE

• Customization: Available
• Feature: Photodegradable
• CAS No.: 632-51-9
• Model NO.: SHBYCM
• EINECS: 632-51-9
• Material: TPE
• Usage: General Plastics, Engineering Plastics, Specialty Plastics
• Plastic Properties After Heated: Thermoplastic Plastics
• Plastic Forming Method: Injection
• Color: Bean Grey
• Product Name: TPE
• TPE: TPE for Membrane Filter Press Plate
• Transport Package: 25kg/Bag
• Specification: 25kg
• Trademark: Boyan
• Origin: China
• HS Code: 39021000
• Production Capacity: 1000000tons

Product Description

TPE compound based on Styrenic  Block Copolymer (SBC). This material can be over-molded onto PP or used for single molding. This grade is designed for injection molding. It is completely recyclable.

General
Appearance	√Translucent
Feature	√Soft Touch	√ Easy Coloring	√Tear Resistance
Compliance	√ RoHS	√ REACH	√ FDA
Form	√ Pellet
Packaging	√25kg/bag

Technical Property
 

Typical Properties	Typical Value	Unit	Test Method
Hardness	85	Shore A	ASTM D2240
Density	0.89	g/cm3	ASTM D792
Tensile Strength at break	15.5	MPa	ASTM D412
Tensile Strength at 100%	4.4	MPa	ASTM D412
Elongation at Break	713	%	ASTM D412
Tear Strength	59	KN/m	ASTM D624
Compression Set at 23ºC x 22hr	26	%	ASTM D395B

The data are not to be defined as specifications.
Notes:
1) The product is incompatible with PVC. Purge thoroughly before and after use of this product with a low flow (0.5 - 2.5 MFR) Polyethylene (PE) or Polypropylene (PP).
2) Color concentrate with PP, LDPE or EVA based carrier is recommended.
3) Drying is not required. However, if moisture is a problem or to get better appearance, dry pellets for 3 hours at 600C.